HFT-S Series Power Supplies | Corotec

HFT-S Series Power Supplies

HFT-S Series: Setting the Standard in Corona Discharge Power

With years of successful operation in a host of challenging applications, our HFT-S Series units deliver rated power into a wide range of electrode widths and configurations, as well as various dielectric materials and thicknesses. Constant output voltage and our Power Density Control System ensure precise, consistent treatment, regardless of web width, treat levels, line speeds, or materials.

Select the full-sized, full-featured HFT-S power supply for a broad range of corona treating applications.

All of our systems generate an efficient high-frequency/low-voltage corona that’s your assurance of high-quality surface treating with reduced downtime due to dielectric failure, high-voltage arc-over, or burn-through.

Standard Features Include:

Power Density Control interface
Digital output meter
Static and dynamic operational status indicators
Low-output alarm circuitry
Diagnostic LEDs and lights
High-speed fault detection circuitry
Easy interconnection for remote metering, interlocks, and control

High Frequency + High Efficiency = High Performance

All of our power supplies are capable of operation at frequencies as high as 40 kHz, offering important advantages over low-frequency systems:

Compact Size: To achieve a given output power, our high-frequency systems require less output kVA than low-frequency systems. This translates to higher efficiency in the output high voltage transformer and smaller overall size for the entire system.

Longer Dielectric Life: Higher frequency reduces peak voltages at the electrode, resulting in less stress on the dielectric material bonded to the treater roll (or to the electrode in bare-roll systems).

Higher Quality Product: High frequency generates lower voltages across the treated material, reducing static buildup and inconsistent treatment due to material wrinkling or lifting from the roll. Metallized webs are less prone to pinholing and metal “blow-off” when treated with our low-voltage, high-frequency systems.

Tech Specs

Model No. HFT-S-5 HFT-S-10 HFT-S-20 HFT-S-30 HFT-S-40 HFT-S-50
KW Rating 0.5 1 2 3 4 5
Volts 120 120 240 230 230 230
Amps 6 11 11 9 12 15
PH 1 1 1 3 3 3
Freq. 50/60 50/60 50/60 50/60 50/60 50/60
Volts 100 100 200 400 400 400
Amps 17 35 35 21 28 35
PH 1 1 1 1 1 1
Freq. 30kHz 30kHz 30kHz 30kHz 30kHz 30kHz
Pwr Supply 17H-15W-9D 20H-16W-8D 20H-16W-8D 36H-24W-9D 36H-24W-9D 36H-24W-9D
HVT 9H-11W-9D 9H-11W-9D 12H-13W-14D 15H-15W-15D 15H-15W-15D 15H-15W-15D
Pwr Supply 30 lbs 40 lbs 40 lbs 60 lbs 60 lbs 60 lbs
HVT 40 lbs 40 lbs 70 lbs 90 lbs 90 lbs 90 lbs